Gas burner will not ignite
A dirty burner, weak spark module, damaged igniter, valve, switch, wiring, or fuel-flow issue can prevent ignition.
Local range repair specialists
Range Repair in Irvine & Orange County
Professional diagnosis for ranges with burners that will not ignite, uneven flames, weak heat, clicking, temperature problems, or unresponsive controls.
$95 Service CallApplied Toward Your Completed Repair
✓ 25+ years experience✓ Licensed & insured✓ 90-day warranty
5.0 ★★★★★402 Google Reviews
Common range problems
What is keeping your range from cooking safely?
Surface burners, ignition, fuel delivery, heating elements, temperature sensing, and controls must work together. We isolate the failed system before recommending a repair.
Burner keeps clicking
Moisture, debris, a misaligned burner cap, stuck switch, damaged electrode, or spark-module fault can cause continuous clicking.
Electric element stays cold
A damaged surface element, receptacle, infinite switch, wiring connection, relay, or control can interrupt electric heat.
Will not start
Controls may respond while burners or the range section remain inactive, or the range may appear completely dead.
Flame is weak or uneven
Blocked burner ports, cap alignment, regulator, air mixture, valve, or supply problems can distort the flame pattern.
Heat will not adjust
A failed burner switch, valve, sensor, relay, or electronic control can leave heat too high, too low, or unresponsive.
Cooktop is cracked or damaged
Cracked glass, damaged grates, loose knobs, broken trim, or corrosion can make the cooking surface unsafe to use.
Error codes
The display may report burner, ignition, temperature, sensor, relay, power, or communication faults.
Real service calls
Recent Range Repairs in Orange County
See the parts replaced, turnaround time, and results from completed ProStar service visits.
Faded digital display restored like new
After four years of use, the range display became difficult to read because its numbers and symbols had faded.
✓Complete display module replacedThe digital readout and controls returned to clear, normal operation.
Read the full service story
Diagnosis confirmed that the complete display module needed replacement. After installing the new assembly and testing the controls, the Jenn-Air range worked and looked like new again.
Slow oven heating corrected with a new broil element
The customer reported that the oven was taking much longer than normal to heat. Diagnosis confirmed a failed broil element.
✓Broken broil element replacedFinal temperature testing confirmed that the oven was heating correctly again.
Read the full service story
After installing the replacement broil element, we retested the oven temperature and heating performance. The range reached the correct temperature and returned to normal operation.
Continuously sparking burner fixed during the first visit
One burner kept sparking continuously, even when it should have stopped. Diagnosis identified a shorted spark switch.
✓Shorted spark switch replacedThe needed part was already in the service van, so the repair was completed immediately.
Read the full service story
We installed the replacement spark switch and tested the LG range. The ignition system stopped clicking continuously, and every burner returned to normal operation.
Ranges we repair
Gas, electric, dual-fuel, slide-in, and professional range service
Ranges combine surface cooking with an range and may use gas, electricity, or both. Diagnosis follows the affected burner, heat source, and control path.
- Freestanding ranges
- Slide-in ranges
- Electric ranges
- Gas ranges
- Dual-fuel ranges
- Induction ranges
- Commercial-style ranges
- Premium pro ranges
Repair or replace?
Repair decisions should consider the cooking surface, fuel system, controls, and range age
A burner or ignition problem does not automatically require a new range. We identify the failed system before you invest in replacement.
Repair may make sense
The range is otherwise dependable and the fault involves an igniter, burner, switch, valve, element, sensor, or another serviceable component.
Replacement may be smarter
There is a cracked structural cooktop, severe corrosion, repeated major failures, a compromised gas system, or critical parts are unavailable.
Stop unsafe gas or electrical operation
Stop using the range if you smell gas, see arcing, notice smoke, or a burner will not shut off. Close the gas supply when appropriate and call for service.
Unsure what failed? Start with professional range diagnostics.
Call 949-382-0942Range brands we service
Range repair for leading cooking-appliance brands
We service many popular freestanding, slide-in, gas, electric, dual-fuel, induction, and professional range brands.
WhirlpoolKitchenAidGESAMSUNGLGBOSCHFrigidaireElectroluxMaytagThermadorVIKINGDacorWolfMieleJennAirKenmoreAmanaMonogram
✓Standard and premium rangesModel-specific diagnosis and quality replacement parts.
Why choose ProStar
Range repair with precise testing and clear expectations
Years of experience
Hands-on experience with gas, electric, dual-fuel, induction, sensor-controlled, and professional ranges.
Service call
Applied toward the completed range repair when you approve the work.
Day warranty
Completed repairs include a 90-day warranty on installed parts and labor.
Clear estimate
We explain the failure and price before beginning the approved repair.
How range service works
From unreliable burners to safe, controlled heat
- 1
Describe the symptom
Tell us the brand, fuel type, affected burner, clicking or flame behavior, and any displayed code.
- 2
Test the range
Your technician checks burner assembly, ignition or element, switches, valves, wiring, fuel delivery, sensors, and controls.
- 3
Review the estimate
You receive the diagnosis and repair price before work begins.
- 4
Run a test cycle
We confirm clean ignition, stable flame or element output, responsive heat adjustment, and safe shutdown.
Google customer reviews
Trusted by Orange County homeowners
Real feedback from customers who called ProStar for range and appliance repair.
“Mike repaired our range, communicated promptly, and installed the part the same day.”
Verified Google customer review
“We appreciate the honest feedback and efficient repair of our stove.”
Verified Google customer review
“He fixed our oven and did an excellent job. Definitely recommend.”
Verified Google customer review
“Mike diagnosed and fixed the problem super fast. I highly recommend him.”
Verified Google customer review
“The care and speed of communication made us believers in the other reviews.”
Verified Google customer review
“Great service and great work ethic.”
Verified Google customer review
1 / 2
Range repair near you
Serving Irvine and Orange County
In-home range service is available throughout Central and South Orange County. Same-day appointments may be available depending on the current schedule.
Check AvailabilityRange repair FAQ
Answers before your service visit
Tell us whether the range is gas, electric, dual-fuel, or induction and which burner or cooking mode fails. Those details help us prepare.
Call 949-382-0942Why will my gas burner not ignite?
Possible causes include debris, a misaligned burner cap, damaged electrode, weak spark module, ignition switch, valve, wiring, or supply problem.
Why does my range keep clicking?
Continuous clicking may come from moisture, debris, a misaligned cap, stuck ignition switch, damaged electrode, or spark-module problem.
Can you repair an electric burner that will not heat?
Yes. Electric surface-heating problems may involve the element, receptacle, switch, wiring, relay, power supply, or electronic control.
Do you diagnose range error codes?
Yes. An error code identifies the system that needs testing, but it does not always identify the exact failed part.
Do you service gas, electric, and dual-fuel ranges?
Yes. We service many gas, electric, dual-fuel, induction, freestanding, slide-in, and professional ranges.
Do you offer same-day range repair?
Same-day appointments may be available depending on workload, location, and the time your request is received.
How much is the range service call?
The service call is $95 and is applied toward the completed repair when you approve the work.
What warranty is included?
Completed range repairs include a 90-day warranty covering installed parts and labor.
Bring safe, responsive heat back to your kitchen
Schedule range repair today
Call ProStar or send the form to request an appointment.